Ribbon Fiber Fusion Splicer for FTTx : 12R

The cutting-edge 12R mass splicer compress field proven fixed v-groove and dual axis observation system for ribbon fiber into a palm size package. Weighing only 776g and low profile design with a maximum thickness of 57mm, it is truly the world's smallest and lightest ribbon splicer.

The contour is specially designed for splicing ribbon fibers in narrow space environment commonly faced by FTTH installers. The light weight is also highly suitable for aerial cable installation. Furthermore, the 12R is also equipped with powerful Li-ion battery and "Ready-to-Splice" work table to deliver superior performance and productivity in FTTx installation.

Specifications

Item Description
Applicable fibers Mass fiber splicer up to 4-fiber
SMF(G.652/657), MMF(G.651), DSF(G.653), NZDSF(G.655)
Cladding dia./ Sheathe dia. 125μm to 3mm by fiber holder system
Cleave length 10mm to 13mm
Splice mode / heating mode Total 100 splice modes / 30 heating modes
Typical splice loss 0.05dB (SM), 0.02dB(MM), 0.08dB(DS) and 0.08dB(NZDS)
Measured by cut-back method relevant to ITU-T and IEC standards.
Splice time / tube heating time Typical 20sec with SM
Typical 30sec with FP-04T, 140sec with FPS-DC-60(for drop cable)
Splice result storage Last 2000 splices
Viewing methods / magnification 2 axis 2CMOS camera with 4.47" color LCD. 66X or 33X magnification.
Tension test 1.96 to 2.25N
Applicable protection sleeve FP-04T / FP-03 / FP-04S and FPS01series
No. of splice / heating per battery full charge Typical 100 cycles with BTR-10(Lithium battery)
Electrode life 1500 splices
Size / weight 121W x 162D x 57H mm / 776g(including battery)
Operating condition Altitude : 0 to 3,660m above sea level, Wind : 15m/sec
Temperature : -10 to 50deg C, Hμmidity : 0 to 95%RH, non-dew
Other features PC software upgrade / data management
Resistance features Shock resistance : 76cm (30inch) bottom surface drop*1
Dust resistance : Exposure to dust( 0.1 to 500μm dia. Alumina Silicate).*1
Rain resistance : H=10mm/hr for 10min*1

*1 :Carried out in Fujikura labs in Japan. The shock resistance, dust resistance and rain resistance test do not guarantee that the product will not be damaged under these conditions.

STANDARD PACKAGE

Description Model No. Q'ty
Fusion splicer 12R 1pc.
With BTR-10 and ELCT2-12
AC adapter ADC-19 1pc.
AC power cord ACC-XX 1pc.
Carrying case CC-29 1pc.
Spare electrodes ELCT2-12 1pair
Instruction manual CD M-12 1pc.
Quick reference guide M-12R-E 1pc.
Alcohol pot AP-01 1pc.
Screw driver SC-01 1pc.

OPTIONAL ITEMS

Description Model No.
Fiber holder FH-50-250(coating dia. of 250μm)
FH-50-900(coating dia. of 900μm)
FH-60-DC250(coating dia. of 250μm in drop cable)
FH-FC-20(coating dia. of 900μm in 2.0mm Sheathe code)
FH-FC-30(coating dia. of 900μm in 3.0mm Sheathe code)
FH-60-LT900(900μm dia. loose buffer fiber)
FH-50-2(2-fiber)
FH-50-4( 4-fiber)
FH-60-250(coating dia. of 250μm)
Battery pack BTR-10
Electrodes ELCT2-12
High precision fiber cleaver CT-30 series (for single to 12 ribbon fibers)
Primary coat stripper PS-02
Nylon jacket stripper JS-01
Protection sleeve FP-04T / FP-03 / FP-04S and FPS01series

Brochure[PDF297KB]