Recoater & Proof-tester

    Fujikura FSR-05/06/07 and NYFORS MiniCoaterTM/Recoater1TM/AutoCoaterTM restore the primary coating on spliced optical fiber with acrylate coatings. All the models are low-profile design suitable for benti-top operation in production environment.

    Molds for various sizes of coating diameters are available and can also be customized on request. All the models come standard with tensile strength tester which tensile strength can be changed, and recoating condition parameters can also be changed depending on coating diameter/length and type of acrylate.

    FSR-05/06/07
    FSR-05

    The new series of recoater provides quick, reliable, and consistent recoating performance. A quick exchange mold and injection pump assembly make setup fast and easy. The quick exchange pump assembly also incorporates a unique bubble elimination design that purges air from the acrylate as it is pumped to the mold. Programmable features make creating and storing fiber specific programs a breeze.

    NYFORS MiniCoater™
    NYFORS MiniCoater

    The MiniCoater™ is a compact and easy-handling re-coater with un-expensive Silicone soft mold. The molds for various sizes of coating diameters are available and it lasts 30 to 80 recoatings and its replacement takes only seconds with no need for alignment. This model is equipped with manual tensile strength tester, so that the fiber is placed around the capstans and pulled by the operator.

    NYFORS Recoater1™
    NYFORS Recoater1

    The Recoater 1™ is a compact and easy-handling re-coater with un-expensive Silicone soft mold. The molds for various sizes of coating diameters are available and it lasts 30 to 80 recoatings and its replacement takes only seconds with no need for alignment. This model is equipped with automatic tensile strength tester. The maximum force is 50N, and its pulling rate and time at the maximum force can be preset. The linear clamp is useful if only short fibers are available with maximum 10N tensile strength test.

    NYFORS AutoCoater™
    NYFORS AutoCoater

    The AutoCoater™ is a fully automatic recoater allowing the operator independence in factory environment. Silicone soft molds for various sizes of coating diameters are available and it lasts more than 50 recoatings and its replacement takes only seconds with no need for alignment. This model is equipped with automatic tensile strength tester. The maximum force is 20N, and its pulling rate and time at the maximum force can be preset.